Wicked Edge can sharpen a lot of blades, but can it sharpen serrated blades? The answer is 'kind of'.
The Convex Handles are able to retouch serrated edges and give them back their bite, but overuse will actually round those serrations and dull the blade. Luckily, serrated edges need very little in terms of resharpening since they tend to stay sharp for much longer than other blade types. The trick is the use your Convex Handles on the scalloped side of the knife. Use a coarser grit Lapping Film (15 - 30 grit), set your angle as low as you can without hitting the vise, and do 15-20 passes to retouch your edge. Then use a finer grit Lapping Film to knock off the burr on the other side.
Remember:
Use light pressure
Serrated edges don't need to be sharpened often, so only do it when it really needs it
A few passes is all you need to bring back your edge
Check our the video below for a quick walk-through as well as some additional tricks and tips!
Curved blades, like karambits, hawkbills, and recurves, may look intimidating but are fairly simply to sharpen in a Wicked Edge. Below are a couple of videos that walk through some tips and tricks to sharpen these types of knives. Sharpening ...
Watch the following video for instructions on installing and using your Wicked Edge Blade Stabilizer. The Wicked Edge Blade Stabilizer has two components. The Blade Stop and the flexible Blade Support. It comes with two Allen wrenches. One large and ...
Sharpening small knives with your Wicked Edge is not only possible, but fairly easy with some tricks and tips. Below is a video that gives you the basic starting point for all small blades. Whether you have a Standard, Cam-Lock, or DualCam Vise, the ...
Long, flexible blades, such as fillet knives, can be a little tricky and require some patience to get it right. Luckily, with a few tips and tricks, you'll be able to put a Wicked Edge on any of these blades. If you have a DualCam or Cam-Lock Vise, ...