Assembly Instructions - Precision Sharpener WE120 and Pro-Pack II

Assembly Instructions - Precision Sharpener WE120 and Pro-Pack II



Verify that you have all parts in the diagram. Some parts may already be assembled.
Locate the Blue Base with the attached Degree Bar.
Locate the Vise Jaw and 2” #10-32 Socket Head Cap Screw.


Turn the Blue Base upside down (the logo will face down) and put the 2” screw through the hole in the bottom of the Degree Bar and through the Blue Base.

Turn the Blue Base right side up and set the Riser Block in the channel of the Blue Base, aligning the two holes together. Then set the Vise assembly in the top channel of the Riser Block and fit the 2” screw through the holes in each part. (The screw goes through the Degree Bar, the Blue Base, the Riser Block and into the bottom of the Vise Jaw.)

Tighten the 2” screw, from the bottom, using your Vise Key. The Vise Key is stored in the side of the Blue Base.

Place the Blue Base in front of you with the Wicked Edge logo facing you. The detents on the front side of the Degree Bar will also be facing you.

Slide the Guide Rod assemblies onto the Degree Bar such that the Ball-Joints of the assemblies face in toward the Vise and the Thumb Screws on the assemblies are facing you.
    • Related Articles

    • Assembly Instructions - Precision Sharpener WE130 and Pro-Pack III

      Verify that you have all parts in the diagram. Some parts may already be assembled. Locate the Blue Base with the attached Degree Bar. Locate the Cam-Lock Vise assembly and 1” #10-32 Socket Head Cap Screw. Set the Vise assembly in the top channel of ...
    • Assembly Instructions - Precision Sharpener WE100 and Pro-Pack I

      Verify that you have all parts in the above diagram. Some parts may already be assembled. Locate the Blue Base with the attached Degree Bar. Locate the Vise Jaw and 1” #10-32 Socket Head Cap Screw. Turn the Blue Base upside down (the logo will face ...
    • What is the difference between the Commercial Series Sharpener and the Generation 3 Pro Sharpener?

      The Commercial Series sharpener is designed to do well in high use situations. It is a larger unit with an enclosed cabinet for stone storage. It includes a cable lock port similar to what’s found on many laptop computers and the cabinet can be ...
    • What's the Gen 3 Pro made of?

      The base, shelf and housing of the Generation 3 Pro, along with the angle control mechanisms, the graduated top plate, the cam housing, vise support, vise lever and vise jaws are machined from 6061T6 aluminum. The cam is machined, hardened and ...
    • Mounting Template and Instructions For Making Your Own Base

      All Wicked Edge knife sharpeners with standard blue bases (pictured below) can be mounted to a work bench or base surface by downloading the template below and following the instructions. Please note that the 10/32 x 1-1/2″ screws provided with your ...